ReadyMadeRC
900MHZ-1.3GHZ RECEIVER W/1258 CUSTOM RMRC VERSION 3!
| CH0 | 910MHZ |
| CH1 | 980MHZ |
| CH2 | 1010MHZ |
| CH3 | 1040MHZ |
| CH4 | 1080MHZ |
| CH5 | 1120MHZ |
| CH6 | 1160MHZ |
| CH7 | 1200MHZ |
| CH8 | 1240MHZ |
| CH9 | 1280MHZ |
| CHH | 1320MHZ |
| CHC | 1360MHZ |
| CHd | 1258MHZ |
| CHE | 1100MHZ |
| CHF | 1140MHZ |
These receivers were custom-modified specifically to Ready Made RC, LLC specifcations! Lots of great improvements over the standard units including:, Additional frequency that's legal for US use!*, Channels:, *Special note for Scherrer LRS or EZUHF users: Although additional filtering has been added to these receivers to increase their tolerance of UHF signals, it is still recommended that you maintain distance between your UHF transmitter and this receiver. Other websites selling unmodified versions of this receiver claiming theirs are UHF tolerant have NOT fully tested the equipment with all UHF systems. If you have a UHF system and one of those receivers, just put your UHF system in front of your patch antenna and see what happens.,
Additional frequencies added to increase compatibility with Lawmate and other ...ReadyMadeRC
900MHZ-1.3GHZ RECEIVER SAW W/1258 CUSTOM RMRC VERSION 3
| CH0 | 910MHZ |
| CH1 | 980MHZ |
| CH2 | 1010MHZ |
| CH3 | 1040MHZ |
| CH4 | 1080MHZ |
| CH5 | 1120MHZ |
| CH6 | 1160MHZ |
| CH7 | 1200MHZ |
| CH8 | 1240MHZ |
| CH9 | 1280MHZ |
| CHH | 1320MHZ |
| CHC | 1360MHZ |
| CHd | 1258MHZ |
| CHE | 1100MHZ |
| CHF | 1140MHZ |
These receivers were custom-modified specifically to Ready Made RC, LLC specifcations! Lots of great improvements over the standard units including:, Additional frequency that's legal for US use!*, Channels:, *Special note for Scherrer LRS or EZUHF users: Although additional filtering has been added to these receivers to increase their tolerance of UHF signals, it is still recommended that you maintain distance between your UHF transmitter and this receiver. Other websites selling unmodified versions of this receiver claiming theirs are UHF tolerant have NOT fully tested the equipment with all UHF systems. If you have a UHF system and one of those receivers, just put your UHF system in front of your patch antenna and see what happens.,
Additional frequencies added to increase compatibility with Lawmate and other ...ReadyMadeRC
HORNET OSD + FY31AP (FY-31AP TRADE EDITION)
| For FY-21AP | Fixed Altitude flying mode; for FY-3ZT/FY-31AP |
| GPS speed (Unit | km/h) |
| Current latitude and longitude of the plane (Format | “dddmm.mmm” ) |
| The angle of turning to the return point (Unit | deg) |
| Total flight time (Format | “mm.ss”) |
| Course angle of flight (Unit | deg) |
| Operating temperature(Unit | ℃) |
| (Unit | mA / h) |
| Climb rate (Unit | m/s) |
| Inputvoltage | 4.0 ~ 6.0 Volt; |
| Currentdraw | 50mA (5V); |
| Size | 47x 27x 20 mm; |
| Weight (excluding wires) | 25g; |
| Temperature range | -25 ° C ~ +70 ° C; |
| Maximum rate of rotation | ≤ 2000 ° /s |
| Input voltage | 3.0 ~ 3.3 Volt; |
| Currentdraw | 60mA (3.3V); |
| Size | 32 x32x 10 mm; |
| Weight (excluding wires) | 22g; |
| Temperature range | -25 ° C ~ +70 ° C; |
The telemetry data is as below:, , Relative altitude (Unit : m), Distance to take-off Point (Unit : m), The battery voltage of the video transmitter (Unit: V), Power battery voltage (Unit: V), Power battery current (Unit: A), The OSD can be controlled to show different display information via one spare channel of your radio Rx. There are 5 optional display modes controlled by the different PWM signals. You can use default mode if you do not want to change the display modes.(the 5 modes separately are as following: A. All Information Displayed; B., The modes are shown as below:, , By using your remote control, the FY-31AP can be turned on or off for the following functions:, , The FY-31AP provides an optional upgrade combining with the FY-OSD and the Data Radio. With this add-on, you will receive:, , :, GPS module:, The FY-31AP can be installed in the following aircraft :, , Any other configuration , please e-mail us for enquiry:, service@feiyu-tech.com, The FY-31AP has been tested to work with the following RC systems:, , Includes:,
Brief Introduction The Hornet- OSD overlays flight telemetry information onto ...ReadyMadeRC
REMZIBI OSD PACKAGE
| - Supply power | 7V-14V (ex. lipo 2S - 3S) |
| - weight | 16 gram (OSD + dedicated GPS) |
| http | //www.happykillmore.com/Softwar...etup/Setup.exe |
| http | //www.happykillmore.com/Softwar...p?LANG=English |
| http | //rc-cam.pl/viewtopic.php?p=32498#32498 |
| Package Includes | Remzibi OSD |
Technical data :, Functionality :, - easily PC connection for configuration/calibration purposes using dedicated PC program (HappyKillmore's excellent work), show information DONE :, - latitude (format DDMM.MMMM or DD.DDDDDD can be chosen),
An excellent high quality, low price on screen display. Support ...ReadyMadeRC
SUPREME FPV STARTER PACKAGE: 1.3GHZ OR 900MHZ FOR US CUSTOMERS
| Instructions | HERE |
Includes:, , 1.3GHz System:, 1500mW Transmitter (Custom Ready Made RC, LLC version with 1258 and 1280MHz channels), Notice: The use and operation of this product in the USA and other countries may require an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations. Frequencies not allowed in the US will be disabled for those items shipped to US addresses.,
PICTURE IS NOT CORRECT, PLEASE SEE PRODUCT DESCRIPTION! Now the ...ReadyMadeRC
CUSTOM 1.3 FPV STARTER PACKAGE: INTERNATIONAL VERSION W/1258MHZ
| Instructions | HERE |
Package starts with the following components:, , NOTE: if you purchase the "no camera" option, the transmitter will only come with the "stock" cable and does not include the custom ReadyMadeRC cable used for attaching it to the rest of the Ready Made RC cables or transmitter battery., Notice: The use and operation of this product in the USA and other countries may require an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations. Frequencies not allowed in the US will be disabled for those items shipped to US addresses.,
Eagle Tree OSD Pro-Ready...see option below! Using the new line ...ReadyMadeRC
CUSTOM 1.3 FPV STARTER PACKAGE: 1258/1280MHZ US VERSION
| Instructions | HERE |
Package starts with the following components:, , NOTE: if you purchase the "no camera" option, the transmitter will only come with the "stock" cable and does not include the custom ReadyMadeRC cable used for attaching it to the rest of the Ready Made RC cables or transmitter battery., *Notice: The use and operation of this product in the USA and other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations. Frequencies not allowed in the US will be disabled for those items shipped to US addresses.,
Eagle Tree OSD Pro-Ready...see option below! Using the new line ...ReadyMadeRC
DRAGONLINK 2 LONG RANGE UHF RECEIVER
Includes:, 1 Long Range Receiver with Antenna, Notice: The use and operation of this product in the USA and many other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. Ready Made RC, LLC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,
One of the most popular long range UHF R/C systems, ...ReadyMadeRC
FY-30A PRO INERTIAL FLIGHT STABILIZATION SYSTEM
| • Any other configuration inquiries, please email us | feiyudz@yahoo.cn. |
| Includes | FY30A module |
FY30A has an integrated three-axis gyro and three-axis accelerometer which controls the aircraft movement in three-dimensional space. By using your remote control, the unit can be turned on or off for the following functions:, - Level flight – When stabilization is activated, the FY-30A will automatically control the aircraft for smooth easy flying. For beginners in RC aircraft flying, this is advantages as it makes flight easier and increases the student pilot self-confidence. The system can be activated throughout the entire flight duration, from take off to landing., The FY30A can be used in the following fixed wing models:, • Traditional layout fixed-wing aircraft with Aileron, Elevator and Rudder, RC Radio suitability:, The FY-30A has been tested to work well with the following RC system:, • Robbe-Futaba PPM / PCM 1024 / PCM G3 mode, 2.4G systems, The FY-30A can be operated in three flight modes modes:, - Mode 1: FY-30A Deactivated Mode. In this mode, the FY-30A stabilization function is turned off. The aircraft is completely under the control of the pilot., - Mode 2: 3D Control Mode. In this mode, the balancer utilizes its 3-axis gyroscope to sense roll velocity and flight attitude. If no input is given by the pilot (sticks in the middle position) the FY30A will lock the current aircraft attitude. This prevents rolling of the aircraft at the axial plane and maintains its current posture. Therefore the aircraft can be easily maneuvered to complete a variety of 3D flight with added stability and smoothness., - Mode 3: Auto Stabilization mode. In this mode, the FY-30A will automatically command the aircraft control surfaces to maintain level flight at all times.,
GREAT NEW FEATURE! The FY30A can now also control multi-rotor ...ReadyMadeRC
FY-901 MULTI-ROTOR FLIGHT STABILIZATION CONTROLLER
| mail us | service |
The FY-901 for multi-rotor copter can be used in the following models:, , :, , The FY-901 has been tested to work well with the following RC system:, , The FY-901Operating Mode for multi-rotor copter supports two flight modes :, , 1: Auto-Stabilization mode., : 3D Control Mode., Gyroscope initialization (re-setting):, , Out of the box, the FY-901 has been fully initialized. However, if the following condition occurs, resetting the gyro is recommended:, , NOTE:,
Introduction FY-901 has integrated three-axis gyro and three-axis accelerometer, which ...ReadyMadeRC
PICOSWITCH - RADIO CONTROLLED RELAY
| Max relay voltage | 60VDC, 125VAC |
| Max relay current | 1A @ 24VDC, 0.5A @ 125VAC (60W lightbulb) |
| Relay resistance | 100 mΩ max |
Weight:, 7.6g / 0.27oz, Specifications:, Note: PicoSwitch has a maximum voltage rating of 125VAC, meaking it unsuitable for toggling 220VAC applications., Diagrams:, , Dimensions:, 0.75" x 0.62" x 0.62", Applications:, Control of lighting systems on RC planes, boats, cars.,
Product Description PicoSwitch is a relay switch that you toggle ...ReadyMadeRC
BATTLESWITCH RADIO CONTROLLED 10A RELAY
| Max relay voltage | 240VAC |
| Max relay current | 10A @ 28VDC, 12A @ 120VAC, 10A @ 240VAC. |
| Relay resistance | 100 mΩ max |
Weight:, 21g / 0.72oz, Specifications:, Diagrams:, , Dimensions:, 1.25" x 1.25" x 0.9", Applications:, Control of powerful auxiliary weapons in RC combat.,
Product Description BattleSwitch is the larger, 10A version of our ...ReadyMadeRC
DOUBLESWITCH RADIO CONTROLLED DUAL 8A RELAY
| Max relay voltage | 240VAC |
| Max relay current | 8A @ 12VDC, 8A @ 240VAC. |
| Relay resistance | 100 mΩ max |
Weight:, 23g / 0.8oz, Specifications:, Diagrams:, , Dimensions:, 1.65" x 1" x 0.72", Applications:, Control of powerful auxiliary weapons in RC combat.,
Product Description DoubleSwitch is a doubled version of our popular ...ReadyMadeRC
AIR TITAN KIT (HARDWARE INCLUDED) NO ELECTRONICS
| ATTENTION | According to |
| Wingspan | 2520MM/ 99.2inch |
| Kits Airplane weight | 2.4kg(5.3IB) including all reinforcement parts |
| Extra Payload | 3.0kg-4.0kg (6.6IB-8.8IB)/ flight weight>6.0kg |
| Customized Motor for Airtitan | M60K/ Power 1500W |
| Testing static thrust | 5.5-6.0kg (6S, 15" Prop) |
| Propeller recommend | 15*6 / 15*7 |
| ESC | Advanced 80A OPTO (without Built-in BEC) |
| External UBEC | 5V/6A,5.5V/6A or 6V/6A (Switchable) |
| Material of fuselage and Wing | EPO |
| RMRC 6s batteries found here | 10,000 mAh |
| Main-wing | built- in 4PCS alloy aluminum plus 2PCS carbon tube through the Main-wing |
| Control surface of Aileron and Elevator | carbon tube reinforced, no need further DIY |
Breakdown for Transport:, This plane carries over the “gentle stall” characteristics of the Penguin, but super sized. No scary tip-stalls. Instead, it has super predictable flight characteristics. Tricycle landing gear with a steerable nose gear is included, along with a stable high wing design, plus a bottom camera port, and secondary top camera mounting area. The ARF version includes an 80A OPTO ESC, Massive 1500W motor, a switch mode 5-6V adjustable UBEC, and heavy duty metal geared servos for the ailerons, elevator, and steering. Hand launch is possible, but you might need to work out a bit before you try it (see beginning of video!). Like the Penguin, this airframe was designed with FPV in mind, but would also serve as a great plane to fly at the field if you just want something you can strap a GoPro to, or maybe even 10 of them since it won’t mind the weight. Available and ready to ship now at Ready Made RC, LLC, the best place to get ALL your FPV and RC equipment!, Specifications:, , Customized Brushless Power system:, Servos:, , Battery Recommendations:, , Flight Recomendations:, *Note : 5S with a 15*8 Prop is okay if your flight weight is less than 5.5kg. A 6S pack will however provide “better power", *Note: Flight weight of 5.5kg-6.0kg can meet most FPV requirements, and we recommend less than 6.0kg for most FPV pilots, High Quality Reinforcement :, , Horizontal stabilizer:,
UN1133 shipping regulations, the glue contained in t his product ...